Cisco Access Point install new IOS

Cisco Access Point install new IOS

On a Lightweight IOS:

– debug capwap console cli   <- without this line LWAP not accepting the conf t
– int g0
– ip address 10.10.10.102 255.255.255.0
– no sh
– archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1140-k9w7-tar.124-25d.JA.tar

On a Autonomous IOS:

– int bvi1
– ip address 10.10.10.102 255.255.255.0
– no sh
– archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1140-k9w7-tar.124-25d.JA.tar

This way you can turn a Cisco Lightweight Access Point into a Autonomous Access Point but also vice versa.

Leave a Reply

Your email address will not be published. Required fields are marked *

-->